MOSIONX catalogs and technical references as PDF. 2D and 3D files for a specific model are supplied free with an enquiry — send us the model code and your CAD format.
| Document | Size | What is inside |
|---|---|---|
| MOSIONX 2026 Catalog | 15.1 MB | Full product range: ball screws, linear guides, splines, support units, modules — dimensions and load ratings |
| Ball Screw Manual 2026 | 50 KB | Series breakdown SFA / SFB / SFV / SFAR / SFVR, accuracy grades, preload, shaft-end options |
| Selection Guide | 36 KB | Sizing sequence: load, life, critical speed, buckling, mounting |
| Linear Guide Reference | 46 KB | TRH / TRS series, accuracy classes N / H / P / SP / UP, preload ZF–Z3 |
| Ball Spline Reference | 32 KB | SLF flanged and SLT cylindrical types, preload P0 / P1 / P2, torque ratings |
| Rotary Series Reference | 31 KB | Rotary ball screw and spline combinations for Z-R and indexing axes |
| Support Unit Manual | 35 KB | BF / BK / EK / FK fixed and supported ends, bearing loads, mounting torques |
| KP Module Manual | 32 KB | Single-axis robot modules: stroke, payload, motor mounting |
| Maintenance Guide | 42 KB | Lubrication intervals, seal care, backlash measurement, failure diagnosis |
| Application Cases | 34 KB | Automation, semiconductor, metrology, robotics and woodworking installations |
The Chinese edition of the 2026 catalog is also available: MOSIONX-2026-Catalog-CN.pdf (10.1 MB).
Catalog PDFs give you the rating tables. For a design you usually need the geometry — that comes from the model drawing. Send the model code and the format you work in, and we return the files by email:
Start from the model database to find the exact code, or use the selector if you have not fixed one yet.
Standard catalog geometry covers most machines, but shaft ends often do not. We machine to drawing: stepped ends, keyways to GB/T 1095, retaining-ring grooves to GB/T 894, and custom nut flanges. Send the drawing with your enquiry and we confirm machinability, then issue a part drawing for approval before cutting metal.
Acceptance is against GB/T 17587.3 for ball screws and GB/T 1800 for fits and tolerances. If your drawing specifies ISO or JIS, we work to the drawing instead.
Yes. 2D and 3D files for standard models come free with an enquiry or order. Send the model code and the format — STEP, IGES, DWG or SolidWorks — and we email the files.
STEP and IGES as neutral defaults, plus native SolidWorks and 2D DWG or DXF on request.
The MOSIONX 2026 catalog is about 15 MB. The shorter references are 30–55 KB each.
Yes. Send the drawing or the shaft-end dimensions. We produce the manufactured-part drawing for your approval before machining.